Protege LX L4-1489cc 1.5L DOHC MFI (1998)
2. Separate the tie-rod end from the steering knuckle by using the Special Service Tools (SSTs).
Bolt (No.1 Engine Mount) Removal Note (10)
1. Support the engine by using the SSTs.
2. Remove the engine mount bracket bolt.
Steering Gear And Linkage Removal Note (12)
-
Remove the steering gear from the right side of the vehicle.
Mounting Bracket Nuts Installation Note (11)
1. Hand-tighten the nuts indicated 4 and 3 in the illustration.
2. Tighten the mounting bracket nuts to the specified torque in order shown.
Tightening torque: 38 - 51 Nm (28 - 38 ft. lbs.).
