Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Spindle: Service and Repair
With Drum Brake
WHEEL HUB, HUB SPINDLE REMOVAL/INSTALLATION (DRUM BRAKE MODEL)
CAUTION: Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the
harness if it is pulled by mistake. Before performing the following procedures, remove the ABS wheel-speed sensor (axle side) and fix it to an
appropriate place where the sensor will not be pulled by mistake while servicing the vehicle.
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
