Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Fluid - A/T: Service and Repair
AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT
WARNING: When the transaxle and ATF are hot, they can badly burn. Turn off the engine and wait until they are cool before changing the
ATF.
1. Remove the dipstick.
2. Remove the drain plug and washer.
3. Drain the ATF into a container.
4. Install a new washer and the drain plug.
Tightening torque 40 - 53 Nm (4.0 - 5.5 kgf.m, 29 - 39 ft. lbs.)
5. Remove the dipstick and add the specified amount and type of ATF through the oil filler tube.
ATF type M-111 or equivalent (e.g. Dexron II)
Capacity 5.4 L (5.7 US quart, 4.8 Imp quart)
6. Install the dipstick.
7. Ensure that the dipstick is in the HOT 65°C (149°F) range.
8. Add ATF to the specified level if necessary.
