mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Transmission Temperature Sensor/Switch, A/T|Testing and Inspection|Page 2281 > < Transmission Speed Sensor, A/T|Locations|Page 2277

Protege LX L4-1489cc 1.5L DOHC MFI (1998)

Page 1
background image

Transmission Temperature Sensor/Switch: Testing and Inspection

TRANSAXLE FLUID TEMPERATURE SENSOR INSPECTION

1. Remove the control valve body.
2. Place the transaxle fluid temperature sensor in ATF along with a thermometer as shown, and heat the ATF gradually.

3. Measure resistance between the terminals E and F of the transaxle fluid temperature sensor.
4. If not correct, replace the transaxle fluid temperature sensor.

5. Install the control valve body.

Transmission Temperature Sensor/Switch, A/T|Testing and Inspection|Page 2281 > < Transmission Speed Sensor, A/T|Locations|Page 2277