Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Shifter A/T: Service and Repair
Removal and Installation
SELECTOR LEVER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal indicated in the table.
4. Connect the negative battery cable.
5. Verify correct operation of the shift-lock system.
Interlock Cable Installation Note
1. Shift the selector lever from P position to 1 range.
2. Install the interlock cable so that the tip touches the front of the operating lever.