mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/T - Selector Lever Hard To Operate|Page 2302 > < Shift Solenoid, A/T|Service and Repair
Page 1
background image

Shifter A/T: All Technical Service Bulletins
A/T - Selector Lever Hard To Operate

Bulletin No.: 009/98
Issued: 09/30/98
Revised: 12/31/98

Category
K (05)

Applicable Model/s
Multiple Models

Subject
A/T SELECTOR LEVER HARD TO OPERATE

BULLETIN NOTE

This bulletin supersedes K 009/98, issued 11/04/98. The WARRANTY INFORMATION has changed.

APPLICABLE MODEL(S)/VINS
All 1995-98 Protege with automatic transaxle that have VINs lower than JM1BC14**W0221733.
All 1992-95 MX-3 with automatic transaxle.

DESCRIPTION

The automatic transaxle selector lever is difficult to operate. In some cases, the lever will not operate at all during cold weather. This is caused by the
lower portion of the manual shaft becoming rusted inside the transaxle case. A modified manual shaft is available to resolve this concern.

Customers complaining of this concern should have their vehicle repaired according to the following procedure.

REPAIR PROCEDURE

1.

Verify customer complaint.

A/T - Selector Lever Hard To Operate|Page 2302 > < Shift Solenoid, A/T|Service and Repair