Protege LX L4-1489cc 1.5L DOHC MFI (1998)
1. Apply compressed air to cooler-side opening, and blow any remaining dust and foreign material from the cooler pipes. Compressed air should be
applied for no less than one minute.
2. Align the marks, and slide the oil cooler hose onto the oil cooler pipe until it is fully seated as shown.
3. Install the hose clamp onto the hose. If reusing the hose, install the new hose clamp exactly into the mark left by the previous hose clamp.
4. Verify that the hose clamp does not interfere with any other parts.