Protege LX L4-1489cc 1.5L DOHC MFI (1998)
5. Install the converter relief valve and converter relief valve spring. Secure them with the spring retainer.
6. Install the torque converter clutch control valve spring, torque converter clutch control valve, and stop plug.
Secure them with the stop pin.
Main Control Valve body Disassembly/Assembly
Caution
^
Denting or scratching these precisely machined components will reduce the ability of the transaxle to shift properly. When handling
these components or the valve body that contains them, be careful not to drop or hit them.
Note
^
If a valve does not side out under its own weight, place the valve body open-side down and tap on the valve body lightly with a plastic
hammer.
1. Disassemble in the order indicated in the table.
Warning
^
Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes. Wear protective eye wear whenever
using compressed air.
2. Clean all parts and holes by using compressed air and apply ATF to them immediately before assembly.
3. Assembly in the reverse order of disassembly, indicated in the table.
