Protege LX L4-1489cc 1.5L DOHC MFI (1998)
Rear Door Glass Removal Note
1. Raise the front edge of the rear door glass about
50 mm {2.0 in} from the fully lowered position.
2. Remove the glass installation bolts and remove the glass from the inside of the sash.
Glass Run Channel Installation Note
^
Align the dowel of the glass run channel with the edge of the glass guide then install the glass run channel.
Regulator Handle Installation Note
1. Raise the rear door glass fully.
2. Install the clip in the regulator handle (A).
3. Push the regulator handle as shown (B).
