RX7 2RTR-1308cc 1.3L MFI (1991)
5. Install the locknut and tighten it with the SST.
Tightening torque:
392-491 Nm (40-50 m-kg, 289-362 ft-lb)
Caution
Place a rag between the SST and the vacuum pipes to protect pipes.
Drive plate (A/T)
1. Fit the key to the eccentric shaft.
2. Install the counter weight to the eccentric shaft.
3. Apply thread locking compound to the eccentric shaft threads.
4. Apply sealant to the contact surface of the locknut.
5. Install the locknut and tighten it with the SST.
Tightening torque:
392-491 Nm (40-50 m-kg, 289-362 ft-lb)
6. Install the drive plate so that the holes in the drive plate and counter weight are positioned as shown in the image. Install the back plate and tighten.
