RX7 2RTR-1308cc 1.3L MFI (1991)
Installation
Install in the reverse order of removal, referring to Installation Note.
Installation note
Caution
Before tightening the eccentric shaft lock bolt, do not move the eccentric shaft and the balance weight to prevent the needle bearing
from being caught by the spacer.
Distributor drive gear
Install the distributor drive gear so that the chamfer surface faces the front housing.
Front cover
1. Replace the front oil seal.
(1) Press out the oil seal.
(2) Apply engine oil to the front cover and new oil seal.
(3) lap the oil seal into the front cover.
(4) Apply engine oil to the oil seal lip.