RX7 2RTR-1308cc 1.3L MFI (1991)
2.
Slide the shaft seal remover SST (0000 41 0812-12) over the shaft. Figure 2.
3.
Turn the shaft seal remover until the projections fall into the grooves. Turn the SST about 30~ counterclockwise. Figure 3.
4.
Pull the SST out to remove the shaft seal.
CAUTION:
Do not reuse the old shaft seal.
Installation
1.
Slide the seal protector SST (0000 41 0812-13) over the shaft. Figure 4.