RX7 2RTR-1308cc 1.3L MFI (1991)
1. Remove the sensor rotor with an allen wrench.
Hub Bolt
Caution:
a) Do not remove the hub bolts unless necessary.
b) Do not reuse the removed hub bolts.
c) Hub bolt replacement of the aluminum hub can be done only once.
If a second replacement is necessary, replace the hub assembly.
2. Remove the hub bolts with the SST.
Inspection
INSPECTION
Check as described below, and replace parts if necessary.
1. Check the hub for cracks or damage.
2. Check the sensor rotor for cracks or damage.