RX7 2RTR-1308cc 1.3L MFI (1991)
5. Check to be sure that the interlock pin is correctly installed.
6. Set the 1st/2nd shift fork onto the 1st/2nd clutch hub assembly.
7. Install the 3rd/4th shift fork and 3rd/4th shift rod, and install the interlock pin into the bearing housing as in Step 4.
8. Install the 1st/2nd shift fork and 1st/2nd shift rod.
9. Install the balls, springs, and cap plugs.
Tightening torque
(A): 39 - 59 N-m (4.0 - 6.0 m-kg, 29 - 43 ft-lb)
(B): 19 - 25 N-m (1.9 - 2.6 m-kg, 14 - 19 ft-lb)
CAUTION: The roil pin should be Installed so that the seam of the pin faces as shown in the image.
10. Install new roll pins into each shift fork.
