RX7 2RTR-1308cc 80 (1984)
Crankshaft: Technical Service Bulletins
Eccentric Shaft Pulley - Installation Tips
Category 1
Applicable Model/s RX-7
Subject ECCENTRIC SHAFT PULLEY
Bulletin No. 007/84
Issued
10/8/84
Revised
ECCENTRIC SHAFT PULLEY ASSEMBLY
DESCRIPTION
No alignment dowels are provided for aligning the eccentric shaft pulley to the eccentric shaft on later model RX-7 vehicles. Consequently, the pulley
may be misaligned during reinstallation, resulting in an incorrect location of the timing mark.
For this reason, whenever the eccentric shaft pulley is removed, please mark the location of the timing mark on the pulley in relation to the eccentric
shaft in order that the pulley may be reinstalled correctly.
