RX7 2RTR-1308cc 80 (1984)
INSPECTION
Eccentric Shaft
1. Wash the eccentric shaft with a cleaning solution.
2. Blow the oil passage clean with compressed air.
Eccentric Shaft Checks
1. Check the eccentric shaft for cracks, scoring, wear or any other damage.
2. Check that the oil passages are open.
3. Check the eccentric shaft run-out. Measure the runout at the end of the shaft, replace it if necessary.
Run-out limit: 0.12 mm (0.0047 in)
4. Check the oil jet spring for weakness, and sticking or damage of the steel ball.