RX7 2RTR-1308cc 80 (1984)
Oil Pump: Service and Repair
Removal/Installation
Legend
1. Cooling fan
2. Air pump drive belt
3. Alternator drive belt
4. P/S pump and drive belt
5. A/C compressor and drive belt
6. Crank angle sensor
7. A/C compressor P/S pump bracket
8. Oil pipe
9. Metering oil pump
10. Oil pan
11. Eccentric shaft pulley lock bolt
12. Eccentric shaft bypass valve and spring
13. Eccentric shaft pulley
14. Front cover
15. Distributor drive gear
16. Oil pump drive gear and driven gear, and chain
17. Oil pump
OIL PUMP
REMOVAL AND INSTALLATION
1. Disconnect the negative battery cable.
2. Drain the engine oil.
3. Remove the parts in the numbered sequence shown in the image.
4. Install in the reverse order of removal.