RX7 2RTR-1308cc 80 (1984)
INSPECTION
METERING OIL PUMP
Rod Clearance
1. Push the fast-idle cam in the direction of the arrow to force the cam down.
2. Check the clearance of the rod and the lever. If necessary, adjust the clearance with washers.
Standard clearance: 0-1 mm (0-0.04 in)
Removal Note
Front cover
1. Turn the eccentric shaft so that the balance weight is in the lower position to provide clearance between the balance weight and water pump.
2. Remove the front cover.
Oil pump lock nut