RX7 2RTR-1308cc 80 (1984)
Oil Pump: Service and Repair
Disassembly/Assembly
1. Snap ring
2. Rear outer rotor
3. Rear inner rotor
4. Key
5. Screw
6. Body
7. Middle plate
8. Front outer rotor
9. Front inner rotor
10. Key
11. Shaft
OIL PUMP
DISASSEMBLY AND ASSEMBLY
1. Disassemble the parts in the numbered sequence shown in the image.
2. Assemble in the reverse order of disassembly.
Caution
Do not confuse the front and rear rotors.
Assembly Note
Outer rotor and inner rotor
Install the outer and inner rotors at front and rear so that the tally marks on the rotors go toward the front housing.