RX7 2RTR-1308cc 80 (1984)
Screw
Crimp the screw after installing it.
INSPECTION
Oil Pump
1. Inspect the oil pump parts for wear or damage, and replace if necessary.
2. Measure the clearance between the lobes of rotors with a feeler gauge.
Standard clearance:
0.03-0.12 mm (0.0012-0.0047 in)
Clearance limit: 0.15 mm (0.0059 in)
3. Measure the clearance between the outer rotor and the pump body.
Standard clearance:
0.20-0.25 mm (0.0079-0.098 in)
Clearance limit: 0.30 mm (0.0118 in)
