RX7 2RTR-1308cc 80 (1984)
Engine Control Module: Technical Service Bulletins
EGI Control Unit - Remanufactured Exchange Program
Bulletin No.
010/91
Issued
4/2/91
Revised
Category
F
Applicable Model/s
(see below)
Subject
REMANUFACTURED EGI CONTROL UNIT PROGRAM
DESCRIPTION
Remanufactured EGI control units for 1990 and 1991 year models have become available through the existing exchange program. The following Parts
Information section shows the available remanufactured EGI control units for the following models: '86-'91 323/Protege, '86-'90 626/MX-6, '88-'91 929,
'89-'91 MPV (except 2.6L), '90-'91 MX-5 and '84-'91 RX-7.
NOTE:
^
New EGI control units are no longer available as the remanufactured units supersede the new units.
^
See Parts Bulletin II/48E or E-9-89 for the core return procedure.
^
The removed bracket from the vehicle should be used when installing the remanufactured unit. Do NOT return the bracket with the removed
control unit.
^
Return the removed control unit WITHIN 7 DAYS to insure continued availability of cores.
This bulletin supersedes the information contained in S/B Category F, no. 008/90.
PARTS INFORMATION
323/Protege Models