RX7 2RTR-1308cc 80 (1984)
Intake Air Plenum: Service and Repair
Fig. 95 Dynamic chamber.
1.
Remove air funnel, then disconnect accelerator cable.
2.
Disconnect throttle sensor connector, then the metering oil pump connecting rod.
3.
Disconnect water hoses.
4.
Disconnect battery ground cable, then remove terminal cover.
5.
Disconnect vacuum sensing tubes, then the air supply valve connector.
6.
Disconnect intake air temperature sensor connector.
7.
Remove attaching bolts, then the dynamic chamber, Fig. 95.
8.
Reverse procedure to install.