RX7 2RTR-1308cc 80 (1984)
Pick-Up Coil: Testing and Inspection
1.
Connect an ohmmeter to terminals in coupler and check the resistance of the pick-up coil. Acceptable resistance is 650 +/- 50 ohms at 20°C (68°F)
on both leading and trailing coils.
2.
Connect an ammeter (on the 1ma range) to the terminals in the coupler and place a screwdriver on the magnet core of the pick-up coil. Make sure
that the indicator of the meter moves when the screwdriver is quickly separated from the core.
3.
Repeat test on both leading and trailing igniters.
