RX7 2RTR-1308cc 80 (1984)
Axle Bearing: Technical Service Bulletins
Tools - Attachment for Rear Axle Shaft Bearing Puller
Category 40
013/86
7/9/86
RWD Vehicles (See note)
SUBJECT
Attachment for Rear Axle Shaft Bearing Puller
NOTE:
Applied models are all RWD vehicles with the exception of 1986-87 RX-7 and 1979-87 B/2000 &
1983-84 B2200.
DESCRIPTION
The attachment (P/N 49S1 21 523A) is newly established for use with the rear axle shaft bearing puller (P/N 49S1 20 520A). The rear axle shaft bearing
puller was previously established for the 1986 B2000.
This attachment must be used together with the rear axle shaft bearing puller for all rear wheel drive vehicles except 1986-87 RX-7 and 1979-87
B2000/1983-84 B2200.
REMOVAL OF BEARING COLLAR
1.
Use a grinder to grind off a part of the bearing collar as shown until 0.5 mm (0.02") remains, then break it with a chisel and remove it from
