RX7 2RTR-1308cc 80 (1984)
Input Shaft: Technical Service Bulletins
Transmission Front Bearing - Modification
Category 7
Applicable Model/s 1984 RX-7 B2000, B2200
Subject TRANSMISSION FRONT BEARING MODIFICATION
Bulletin No.. 003/84
Issued
4/17/84
Revised
Heavy Duty Front Bearing
DESCRIPTION
The front bearing in the transmission has been changed to a heavy duty type since the production date of January, 1984.
VIN OF PRODUCTION CHANGE
RX-7 12A:
JM1FB331 E0815218
January, 1984
B2000 Short Bed:
JM2UC121 E0835560
January, 1984
Long Bed:
JM2UC221 E0815129 January, 1984
B2200 Short Bed:
JM2UD121 E0800844
January, 1984
Long Bed:
JM2UD221 E0801282 January, 1984
PARTS INFORMATION
PART NUMBER
NEW
OLD
DESCRIPTION
INTERCHANGEABILITY
M502 17 295
9960 63 3063
Ball Bearing
NEW to OLD
Note:
1. This modification has been already taken place on the 1984 RX-7 13B's since the beginning of production.
2.
The following heavy duty type bearings are also available for the service part.
PART NUMBER
HEAVY DUTY TYPE
STANDARD TYPE
DESCRIPTION
APPLIED MODEL
