RX7 2RTR- 1308cc 1.3L FI (1987)
Subframe: Customer Interest
Suspension, Rear - Clicking or Metallic Noise
Category 13
Applicable Model/s 1986-1987 RX-7
Subject
REAR SUSPENSION SUB-FRAME WASHER
Bulletin No. 006/86
Issued
7/9/86
Revised
REAR SUSPENSION ASSEMBLY
TIGHTENING TORQUE
DESCRIPTION
The following modifications have been made to prevent a clicking noise or metallic noise from the rear suspension during a sudden acceleration from a
stop.
1.
A washer has been newly installed between the stopper washer and the sub-frame nut.
2.
The side-frame bolt has been lengthened.
3.
The tightening torque for the sub-frame nut has been changed.
NOTE:
For vehicles produced prior to the VIN shown below, tighten the sub-frame nut to the specification shown on Service Bulletin, Category 13, 004/86
(116-130 ft.lbs.).
VIN OF PRODUCTION CHANGE
1986 RX-7:
JM1FC331 G0140158
April, 1986
1987 RX-7 Turbo:
JM1FC332 H0140158
April, 1986
PARTS INFORMATION
PART NUMBER
