RX7 2RTR- 1308cc 1.3L FI (1987)
Intake Manifold Gasket: All Technical Service Bulletins
Intake Manifold - Rough Idle After Replacing Gasket
Bulletin No. 005/95
Issued 3/15/95
Revised 6/16/95
Category
F
Applicable Model/s
1986-94 RX-7
Subject
INTAKE MANIFOLD GASKET PRECAUTIONS
The illustration in this bulletin is revised. Replace the original bulletin with this revised copy.
APPLICABLE MODELS/VINS
1986 - 94 RX-7 Model Vehicles
DESCRIPTION
Rough idle that occurs after replacing an intake manifold gasket may be caused by damage to the gasket. If the proper torque tightening sequence is not
followed, cracks and/or breakage may occur.
INSTALLATION PROCEDURE
Refer to the instructions and tightening sequences when installing the gasket. Make a note in the applicable workshop manuals to avoid problems during
installation.
