mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Engine - Hard Cold Start|Page 1918 > < Campaign - Spark Plug|Page 1912
Page 1
background image

Spark Plug: All Technical Service Bulletins
Engine - Hard Cold Start

Category     

Applicable Model/s

5

1986-1988 RX-7

Subject HARD START WITH COLD ENGINE
Bulletin No. 018/88
Issued

10/17/88

Revised
DESCRIPTION

The following corrective action should be taken if a customer complains of hard starting in cold weather conditions under the following situations:

^

Restarting after short distance driving.

^

After moving from garage, stopping engine then restarting.

REPAIR PROCEDURE

1.

Change spark plug to new air gap type.

NOTE:
The new type of spark plug can be distinguished from others as follows.

2.

Disconnect sub-zero starting assist device (if equipped).

NOTE:
Disconnecting the sub-zero starting assist device and the use of the new style spark plug are not recommended for carbureted engines prior to
1986. Mazda Motor Corporation has discontinued connecting the coupler for the sub-zero starting device. DO NOT reconnect this coupler at
PDI or servicing.

Engine - Hard Cold Start|Page 1918 > < Campaign - Spark Plug|Page 1912