RX7 2RTR- 1308cc 1.3L FI (1987)
Knock Sensor: Service and Repair
KNOCK SENSOR
Fig. 33 Knock sensor removal.
1.
Disconnect the knock sensor Fig. 33.
2.
Remove the throttle chamber.
3.
Remove the knock sensor.
4.
Installation is reverse order of removal.
KNOCK CONTROL UNIT
Fig. 34 Knock sensor control unit removal.-----106
1.
Remove the front scuff plate (right side) and front side trim (right side).
2.
Disconnect the knock control unit connector.
3.
Remove the knock control unit Fig. 34.
4.
Installation is reverse order of removal.
