mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Engine - Surge or Stumble During Acceleration|Page 2887 > < Engine Controls - Misfire and Hesitation Over 6000 RPM
Page 1
background image

Air Flow Meter/Sensor: All Technical Service Bulletins
Engine - Surge or Stumble During Acceleration

Category Applicable Model/s           

Subject

Bulletin No. 042/88

4

1986-87 RX-7

SURGE OR STUMBLE

Issued

2/11/88

DURING ACCELERATION

Revised

DESCRIPTION

If you encounter a 1986-87 RX-7 vehicle with a surge or stumble during acceleration at more than 2500 rpm, this may be due to an improper ground
between the emission control unit and the air flow meter. Test for the symptom according to the procedure shown in this Service Bulletin. (Refer to
Service Bulletin Category 4, No. 036/87.)

The ground circuit of the emission control unit has been improved since November 1, 1986.

VIN OF PRODUCTION CHANGE

CHECKING PROCEDURE

Use an ohmmeter to check the resistance between the 2C terminal of the emission control unit and the boost sensor/(pressure sensor) ground terminal
(BrB). If the resistance is not 0, proceed to the next step.

Engine - Surge or Stumble During Acceleration|Page 2887 > < Engine Controls - Misfire and Hesitation Over 6000 RPM