RX7 2RTR- 1308cc 1.3L FI (1987)
Fig. 30 Adjusting air adjust screw.
5.
Check and adjust throttle sensor (refer to "COMPUTERIZED ENGINE CONTROLS").
6.
On non turbo models remove blind cap and adjust idle speed to 725-775 rpm (A/T: N Range) by turning air adjust screw, Fig. 30.
Fig. 27 Adjusting air adjust screw.
7.
On turbo models remove the blind cap from the BAC valve and adjust the idle speed to 725-775 rpm by turning the air adjust screw Fig. 27.
8.
Install blind cap and disconnect jumper wire from initial set coupler. Caution: If the jumper wire is not removed, the engine performance is
reduced. Make certain the jumper wire is removed.
