RX7 2RTR- 1308cc 1.3L FI (1987)
2.
Connect the checker and attachment A to the checking connector (green) as shown.
3.
Turn on the ignition switch and check that one of the lamps illuminates.
4.
If both lamps illuminate or neither lamp illuminates, adjust the throttle sensor by turning the throttle sensor adjusting screw so that one of the
lamps illuminates.
NOTE:
^
Do not use excessive pressure on the screw; this may cause incorrect adjustment.
^
This illustration shows 1984-1985 EGI RX-7. 1986 models differ and 1987 Turbo models differ again. Please refer to the appropriate shop
manual for exact location of the adjust screw.
1981-1985 RX-7 (12A) with Carburetor
1.
Warm up the engine to normal operating temperature. Turn off the engine.
2.
Disconnect the connector (brown) as shown.
