RX7 2RTR- 1308cc 1.3L FI (1987)
^
B. 323 1986-1987 MODEL YEAR 323 WAGON 1987 MODEL YEAR
1.
Remove the rear seat cushion.
2.
Remove the rear outer and inner lap belts.
3.
Remove the rear pillar trim caps.
4.
Install the new rear outer, inner lap belts and shoulder belts (as shown in illustration).
NOTE:
Spacer Thickness (*) (Use correct spacer specificafly designated for your vehicle)
3HB ........ 0.47 in. (12 mm)
4SD ........ 0.59 in. (15 mm)
SHB ........ 0.47 in. (12 mm)
Wagon....
0.39 in. (10 mm)
^
Specified Tightening Torque (**) 28-58 ft.lb. (3.9-8.0 m-Kg, 38-78 N-m)
5.
Reinstall the rear seat cushion.
