RX7 2RTR- 1308cc 1.3L FI (1987)
Alignment: Service and Repair
Distance From Subframe to Lateral Link Ball Joint
Fig. 6 Adjusting distance from subframe to lateral link ball joint. 1986-88 RX-7
Measure the distance between the center of the subframe rubber mount and the center of the lateral link ball joint for both left and right of vehicle. If
measurements obtained are within .2 inch or each other, distance is correct. If not, adjust as follows:
1.
To increase the distance, turn adjusting cam as follows:
a. Right arm-turn adjusting cam clockwise, Fig. 6.
b. Left arm-turn adjusting cam counterclockwise, Fig. 6.
2.
To decrease the distance, turn adjusting cam as follows:
a. Right arm-turn adjusting cam counterclockwise, Fig. 6.
b. Left arm-turn adjusting cam clockwise, Fig. 6. Amount of trailing arm movement is .07 inch.
