RX7 2RTR- 1308cc 1.3L FI (1987)
Suspension Strut / Shock Absorber: Service and Repair
Fig. 1 Shock absorber & spring assembly. 1986-88 RX-7
REMOVAL
1.
Raise and support vehicle.
2.
Remove components in numerical sequence shown in Fig. 1.
3.
When removing shock absorber, note the following:
a. Remove disc brake caliper attaching bolt.
b. Suspend caliper assembly using a suitable piece of wire. Do not disconnect brake lines.
c. Remove shock absorber attaching bolts and nuts, then the shock absorber assembly.
Fig. 2 Exploded view of shock absorber & spring assembly. 1986-88 RX-7
