mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Countershaft Gear - Revised|Page 3540 > < Case, M/T|Service and Repair|Page 3535
Page 1
background image

Countershaft: Technical Service Bulletins
Countershaft Gear - Revised

Category      

Applicable Model/s

Subject

Bulletin No. 034/87

7

1987 RX-7 Turbo

COUNTERSHAFT GEAR

Issued

7/3/87

Revised

DESCRIPTION

The friction gear and the diaphragm spring have been discontinued since the production of April, 1987 in order to reduce the noise from the countershaft.
This noise is similiar to a faulty bearing and occurs only in neutral with the clutch engaged. The modified countershaft is available as a repair part for
vehicles with the above noise produced prior to the VIN listed below.

NOTE:
If the friction gear is removed from the countershaft of vehicles produced prior to the VIN listed below, there may be an increase in gear rattle noise
when idling.
VIN OF PRODUCTION CHANGE

RX-7 Turbo:

JM1FC332 H0547007

April, 1987

PARTS INFORMATION
NOTE:
The modified countershaft will be available as a repair part around the beginning of August, 1987.

Countershaft Gear - Revised|Page 3540 > < Case, M/T|Service and Repair|Page 3535