RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
Rotor: Service and Repair
REAR OIL SEAL
PREPARATION
SST
Removal
1. Disconnect the negative battery cable.
2. Drain the engine oil.
3. Remove the manual transmission.
Remove the automatic transmission.
4. Remove the clutch cover and clutch disc.
(With M/T)
5. Install the SST against the flywheel.
Caution
Place a rag between the SST and the vacuum pipes to protect the pipes.
6. Remove the locknut with the SST.