mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air/Fuel Mixture > < Fuel Pressure|Specifications|Page 1750
Page 2
background image

If pressure is higher than the maximum specified, check fuel return line for kinks or restriction. If pressure is lower than the minimum specified,
check fuel filter. If filter and return line are OK and pressure is still not within the specified range, replace pressure regulator. 

10.

Disconnect vacuum hose from fuel pressure regulator with engine idling.

 

^

Fuel pressure should increase when vacuum hose is removed.

34 - 40 psi (235 - 275 kPa)

 

If not, replace pressure regulator.

 
11.

Shut engine "OFF" and wait 5 minutes, then observe residual system pressure on gauge. After the specified off time, the pressure regulator should
retain a minimum fuel system pressure as listed below.

 

Minimum 18 psi (128 kPa)

 

If not, check for leaking fuel injector(s). If injectors are not leaking, replace pressure regulator.

 
If all test results are OK, fuel pump and pressure regulator are OK.
 

Air/Fuel Mixture > < Fuel Pressure|Specifications|Page 1750