RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
Fig. 35 Timing Marks
3.
Connect timing light to high-tension lead of front trailing side. Check that mark on pulley (red) aligns with indicator pin.
LEADING
5° ± 1°ATDC (Yellow)
TRAILING: 20° ± 2° ATDC (Red)
Fig. 36 Crank Angle Sensor Adjustment
4.
If adjustment is required, remove blind cap, loosen lock bolt and turn crank angle sensor.
5.
Tighten lock bolt to 69 - 95 in.lb (7.8 - 10.8 Nm) and install new blind cap.
6.
Remove test connector jumper wire.