RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
Fig. 2 Exploded View Of Shock Absorber & Spring Assembly
ASSEMBLY
Reverse numerical sequence shown in Fig. 2 and note the following:
1.
Using tools 490223640B and 490370641 or equivalents, compress coil spring assembly.
2.
Install mounting block into a suitable vise.
3.
Torque piston rod upper attaching nut to specification. Ensure spring is properly seated in the upper and lower seats.
Fig. 3 Positioning Mounting Block
INSTALLATION
Install shock absorber and spring assembly into vehicle by reversing numerical sequence shown in Fig. 1. When installing mounting block, place
mounting block onto suspension tower so that the white mark on the mounting block is between the front and inside positions on mounting block, Fig. 3.
