RX7 2RTR- 1308cc 1.3L Turbo FI (1989)
Fig. 2 Mounting Bolts A & B
1.
Using a suitable press and tools 49F026102 and 490259748 or equivalents, press new wheel bearing into the bearing housing.
2.
Install snap ring and dust cover.
3.
Using a suitable press and tool 49F026102 or equivalent, press in wheel hub.
4.
Mount wheel hub and knuckle onto driveshaft, then place knuckle onto rear axle casing.
5.
Torque bolts A to 46-69 ft. lbs., bolts B to 82-111 ft. lbs., Fig. 2.
6.
On models with anti-lock brake system, install speed sensor and adjust clearance between speed sensor and sensor rotor. Clearance should be
.016-.039 inch.
7.
On all models, install disc plate and caliper assembly. Torque caliper attaching bolts to specification.
8.
Depress brake pedal to secure disc plate, then torque locknut to specification.
9.
Using a dial indicator, measure wheel bearing play. Wheel bearing play should be .004 inch or less. If play exceeds specified amount, replace
wheel bearing.
10.
Crimp driveshaft locknut onto driveshaft groove.
