RX8 2RTR-1.3L (2006)
2.
Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect the vehicle for a Campaign Label MPP02 attached to the vehicle's
hood. Refer to eMDCS System - Warranty Vehicle Inquiry Results table.
NOTE:
Verify the campaign number as the vehicle may have multiple labels.
eMDCS System - Warranty Vehicle Inquiry Results
INSPECTION PROCEDURE
This overspray condition has unique characteristics and should not be incorrectly identified as rail dust or acid rain. It is imperative that the correct type
of paint contamination first be identified before attempting this repair procedure.
1.
Place the vehicle in your detail / car wash area. This area must be well-lit away from direct sunlight.
2.
Rinse the exterior of the vehicle with water until all of the "loose" debris has been removed.
3.
Wash and dry the vehicle.
4.
Visually inspect the exterior of the vehicle (mainly the horizontal surfaces).
NOTE:
The overspray are specks that appear in a continuous pattern and are approximately 1 mm in diameter.
^
If the contamination is identified as overspray, proceed to "REPAIR PROCEDURE".
NOTE:
Rail dust appears as an orange speck, uneven in shape. Additionally, if you gently rub the affected surface with your hand, it will feel very
rough.
^
If the contamination is other than overspray, (i.e. iron particles, industrial fall-out, or acid rain), repair as necessary using current policy
and procedures. Proceed to "IRON PARTICLES / INDUSTRIAL FALLOUT / ACID RAIN DAMAGE".
