RX8 2RTR-1.3L (2006)
A.
Click on MOP POS # PID.
B.
Click on "#" symbol.
C.
Click "finger" symbol.
D.
Click on "+ arrow up" symbol until MOP POS # indicates "60".
4.
Allow engine to idle for 8 minutes with MOP POS # at step 60.
NOTE:
Make sure transmission is in NEUTRAL or PARK and all loads OFF (AC, blower etc.), do not touch accelerator pedal during this time or test
will abort.
5.
Tap accelerator pedal after the 8 minutes have elapsed to abort test. MOP POS # will drop from step # 60.
6.
Allow engine to idle for 5 minutes.
7.
Perform test drive lasting at least 20 minutes following these guidelines:
