RX8 2RTR-1.3L (2006)
Main Relay (Computer/Fuel System): Testing and Inspection
Main Relay Operation Inspection
Main Relay Operation Inspection
1. Verify that the main relay clicks when the ignition switch is turned to the ON position and off.
-
If there is no operation sound, inspect the following:
-
Main relay (See RELAY INSPECTION.) See: Relay Inspection
-
Wiring harness and connector between battery and main relay terminal A.
-
Wiring harness and connector between PCM terminal 5AC, 5AF and main relay terminal C.
-
Wiring harness and connector between PCM terminal 4E and main relay terminal E.
-
Wiring harness and connector between PCM terminal 4Q and engine fuse.
