RX8 2RTR-1.3L (2006)
Keyless Entry Module: Component Tests and General Diagnostics
Keyless Control Module Inspection [With Advanced Keyless System]
KEYLESS CONTROL MODULE INSPECTION [WITH ADVANCED KEY LESS SYSTEM]
1. Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).
-
If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item(s)" and related wiring
harnesses.
2. If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, perform symptom
troubleshooting [KEYLESS ENTRY SYSTEM]. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Testing
and Inspection/Symptom Related Diagnostic Procedures/Keyless Entry System/Symptom Troubleshooting Index
Keyless Control Module Inspection [Without Advanced Keyless System]
KEYLESS CONTROL MODULE INSPECTION [WITHOUT ADVANCED KEY LESS SYSTEM]
1. Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).
-
If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item(s)".
2. If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, perform symptom
troubleshooting.
