RX8 2RTR-1.3L (2006)
Control Module HVAC: Component Tests and General Diagnostics
A/C AMPLIFIER INSPECTION
1. Turn the ignition switch to the ON position.
2. Connect the negative (-) lead of the tester to body ground.
3. By inserting the positive (+) lead of the tester into each A/C amplifier terminal, measure the voltage according to the terminal voltage table.
-
If there is any malfunction, inspect the parts under "Inspection item(s)".
-
If the parts under "Inspection item(s)" are found to be normal, replace the A/C amplifier.
