RX8 2RTR-1.3L (2006)
3. Connect the SSTs (Adapter harness) to the passenger-side air bag module as shown in the figure.
4. Place the padded surface of the passenger-side air bag module facing the center of the tire as shown in the figure. To secure the air bag module to
the tire wheel, wrap a wire (cross section 1.25 sq.mm (0.002 sq.in) or more) through the tire and around the bolts at least 4 times.
WARNING: If the air bag module is not properly instal led to the tire, serious injury may occur when the module is operated (deployed).
When installing the air bag module to the tire, make sure the padded surface is facing the center of the tire.
5. Stack the tire with the passenger-side air bag module on top of two tires without wheels. Stack a tire without a wheel on top of the tire with the
passenger-side air bag module, and then stack another tire with a wheel on the very top.
6. Secure the tires with wire.
