RX8 2RTR-1.3L (2006)
CAUTION: Do not remove the Harness protective tape. Otherwise, the wires could rub against the body, which could result in water penetration
and electrical shorting.
CONNECTORS
Data link connector
-
Insert the probe into the terminal when connecting a jumper wire to the data link connector.
CAUTION: Inserting a jumper wire probe into the data link connector terminal may damage the terminal.
Disconnecting connectors
-
When disconnecting connector, grasp the connectors, not the wires.
-
Connectors can be disconnected by pressing or pulling the lock lever as shown.
Locking connector