RX8 2RTR-1.3L (2006)
Shift Solenoid: Testing and Inspection
[RC4A-El] Automatic Transmission/Transaxle
SOLENOID VALVE INSPECTION [RC4A-EL]
Caution:
^
Water or foreign material entering the connector can cause poor connections or corrosion. Be sure that water or foreign material do not
enter the connector when disconnecting it.
Resistance Inspection (On-Vehicle)
1. Remove the engine cover.
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Remove the catalytic converter.
5. Remove the insulator.
6. Disconnect the solenoid valve connector.