RX8 2RTR-1.3L (2006)
Radiator (in Tank Oil Cooler) Installation Note
1. The automatic transmission oil cooler flushing must be performed whenever a transmission is removed for service because the existing fluid may
be contaminated, and to prevent contamination of new fluid.
Note:
^
Flushing must be performed after installation of the overhauled or replaced transmission.
2. Follow the instructions in the manufacturer's publication for flushing operation.
Oil Pipe, Hose clamp, Oil hose Installation Note
1. Apply compressed air to cooler-side opening, and blow any remaining grime and foreign material from the cooler pipes. Compressed air should be
applied for more than 1 min.
